Image default

Master the power of the sea and choose passive heave compensation

If you are working at sea, you might be in need of a device to master the power of the sea. It is a matter of reducing the impact of waves on lifting and drilling operations. The company Draftec may have a perfect solution for you. The company’s passive heave compensation is known for its efficiency. When a burden is put on the seabed, motion compensation is actually almost a necessity. The environment will have to compensate for the released force in some way. The specialist provides both passive and active heave compensation to help control the position of a load.

Optimise your working capacity

Passive heave compensation is the perfect solution for offshore equipment on or connected to the seafloor. Other motion compensated rotating hydraulic equipment can also be supplied by the specialist. It is possible to do so with or without servo-electric and hydraulic systems and stored or accumulated energy in a dedicated medium. Unfortunately, the sea can become quite unreliable. It is thus imperative to be well prepared for any situation. A profound understanding of passive heave compensation is therefore crucial.

Do not be afraid to ask for additional information

It is a good idea to contact the specialist if you have questions about your future activities. All their know-how enables them to determine the possibilities and impossibilities. Particular care should be taken when operating at sea. Without a doubt, the sea can be extremely unpredictable, which is why you had better be prepared for any scenario. An in-depth knowledge of passive heave compensation is mandatory. If, however, you are still not sure, consult your specialist for help without delay. We hope that after reading this, you have a clear understanding of what is important in passive heave compensation and you now know the best expert to turn to.